Then, place a pliers or a wrench around the bottom of the valve and twist it counter clockwise to loosen it from the faucet body. Pull upwards on the base if it seems stuck in order to dislodge the valve and the O-Rings.'. 'Depending on where your leak is, take the faucet apart.
3. Remove The Stem. After removing the handles, remove the bonnet nut properly by turning it counterclockwise. Underneath the nut will be the stem, which you should also remove properly by turning it counterclockwise. 4. Replace The Washer. At the bottom of the stem, you will find a screw with a washer.
FIX-A-TAP products offer a comprehensive range of water saving repair products for taps, showers, spouts, sinks, basins and traps. For ease of use, all products contain installation instructions and handy Hints to assist in leak repair. The following pages identify many products to solve the most common water wastage problems.
Step 6: Turn On the Water. Slowly turn on the water supply to the shower. Check for any leaks around the connections. If you see any leaks, gently tighten the shower head a bit more. Make sure both the hot and flow through the new shower head without any issues.
Step 1. Turn off the hot and cold water supply to the shower. Some shower faucets have water shutoff valves built into the faucet body; you turn the valves with a screwdriver to shut off the water flow from the hot and cold supply tubes into the faucet body. Carefully have the shower head removed by unscrewing it counterclockwise.
Step 2: Remove the handle with an Allen wrench. For handles that come with a cap, pry it off and unscrew the screw beneath. Step 3: Separate the faceplate from the wall by removing the two screws. Step 4: Most shower valves have a clip to keep the cartridge in place.
Nav5. 0lsgxh12tb.pages.dev/3750lsgxh12tb.pages.dev/2090lsgxh12tb.pages.dev/1300lsgxh12tb.pages.dev/3520lsgxh12tb.pages.dev/960lsgxh12tb.pages.dev/2390lsgxh12tb.pages.dev/3410lsgxh12tb.pages.dev/3650lsgxh12tb.pages.dev/157
fixing a leaking shower tap
